Industrializing AM and merging the worlds of additive manufacturing and machining – Presented by Stijn Brilman, cards plm solutions

Stijn Brilman

Stijn Brilman, cards plm solutions, will speak at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

Getting rid of the bin of broken dreams! How do we deliver high quality and accurate metal products? Unfortunately, people often forget that AM is more than the printer and controlling the printing process. In order to realize the full potential of additive manufacturing, companies must employ a robust process that integrates design, engineering, manufacturing planning and production operations.

In this presentation we provide the insights of an end-to-end workflow where AM and machining are combined.

Continue reading “Industrializing AM and merging the worlds of additive manufacturing and machining – Presented by Stijn Brilman, cards plm solutions”

How to boost Additive Manufacturing (AM) for serial production? Opportunities to improve AM processes and Machines – Presented by Abdellatif Bey-Temsamani, Flanders Make

Abdellatif Bey-Temsamani

Abdellatif Bey-Temsamani, Flanders Make, will speak at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

With the industrial transition to use Additive Manufacturing (AM) for Series Production, AM machine builders, SW/HW providers and end-users are confronted with different challenges to increase productivity, decrease lead time and produce parts with high quality. The current practice is however far from reaching the desired productivity and quality that are translated to large scrap rate in current production. This presentation will highlight examples for opportunities, based on industrial projects conducted by Flanders Make, to improve the AM process and machines leading to reduce lead time, increase productivity and reduce the scrap rate.

Continue reading “How to boost Additive Manufacturing (AM) for serial production? Opportunities to improve AM processes and Machines – Presented by Abdellatif Bey-Temsamani, Flanders Make”

Changing the design mindset with 3D Printing. Examples from the UK National Centre for AM – Presented by Miguel Fernandez-Vicente, National Centre for Additive Manufacturing (The MTC)

Miguel Fernandez-Vicente

Miguel Fernandez-Vicente, National Centre for Additive Manufacturing (The MTC) will hold his presentation at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

Continue reading “Changing the design mindset with 3D Printing. Examples from the UK National Centre for AM – Presented by Miguel Fernandez-Vicente, National Centre for Additive Manufacturing (The MTC)”

Don’t simulate your design, design your simulation! – Orlando Sardaro, Design8

orlando sardaro

Don’t simulate your design, design your simulation! – Orlando Sardaro, Design8, at 3D Printing Design & Engineering Conference on April 16, during the 3D Printing Event at Brightlands Chemelot Campus in The Netherlands.

We are used to start our design process on paper using a pencil and finish it using CAD. And that is fine. I don’t believe there is any CAD system today that is as flexible as a pencil. Continue reading “Don’t simulate your design, design your simulation! – Orlando Sardaro, Design8”

Boosting productivity with 3D printing design tools for engineers – Presented by Alkaios Bournias Varotsis, 3D Hubs

Alkaios Bournias Varotsis

Boosting productivity with 3D printing design tools for engineers – Presented by Alkaios Bournias Varotsis, 3D Hubs, at the 3D Printing Design & Engineering Conference, on April 17, 2018, at Brightlands Chemelot Campus, Geleen, The Netherlands.

The 3D printing landscape is changing rapidly! How can an organization keep up with the developments in the technology and integrate 3D printing effectively in the product design cycle? In this presentation, you will learn about the tools we have recently developed to educate engineers and designers on 3D printing, help them find the right material for their application and check their models before they send them to print.

About Alkaios Bournias Varotsis
I studied mechanical engineering at the National Technical University of Athens, Greece and I did my Ph.D. in Additive Manufacturing at Loughborough University, UK before I joined 3D Hubs as the Technical Marketing Engineer. At my current position, I am responsible for all technical content published on the platform and I have the mission of educating designers and engineers about 3D printing and help them get the most out of the technology. Continue reading “Boosting productivity with 3D printing design tools for engineers – Presented by Alkaios Bournias Varotsis, 3D Hubs”

Advanced simulation to leverage the true Additive Manufacturing potential – Presented by Olivier Lieater, e-Xtream engineering

Olivier Lietaer

Advanced simulation to leverage the true Additive Manufacturing potential – Presented by Olivier Lieater, e-Xtream engineering, at the 3D Printing Design & Engineering Conference, on April 17, 2018, at Brightlands Chemelot Campus, Geleen, The Netherlands.

Additive Manufacturing of polymers is transitioning from rapid prototyping to a true industrial production technique. While it brings valuable opportunities to the industry, such as drastically decreasing the time-to-market of new products or enabling lightweight, multi-material and multi-functional designs, it also comes with a series of challenges for the engineers. The reliability of the mechanical properties of the final part still has some uncertainty and is not fully supported by standard engineering tools. Dimensional accuracy is not always met and cannot be predicted prior to printing.

To support this transition, the engineering workflow which is daily applied for traditional manufacturing processes needs to be replicated and adapted to the additive manufacturing. A holistic simulation approach for additive manufacturing of plastics and composites is proposed, covering material engineering, process simulation and structural engineering of both SLS and FDM. The multiscale material modeling techniques – which are essential to handle the several scales involved in Additive Manufacturing – will be presented and discussed.

The very strong influence of the manufacturing on the material and global component behavior is illustrated in industrial applications and the validity of this integrative approach is demonstrated in several applications, including warpage predictions, the computation of the effective mechanical response of lattices and as-printed part performance simulations (stiffness, strength, …) as a function of the material and the printing process parameters such as toolpath.

Continue reading “Advanced simulation to leverage the true Additive Manufacturing potential – Presented by Olivier Lieater, e-Xtream engineering”

Why does 3D printing matter to Shell? – Presented by Patrick de Winter, Royal Dutch Shell

patrick de winter

Why does 3D printing matter to Shell? – Presented by Patrick de Winter, Royal Dutch Shell plc, at the 3D Printing Design & Engineering Conference, on April 17, 2018, at Brightlands Chemelot Campus, Geleen, The Netherlands.

What is the value of 3D printing to a company like Shell, what challenges do we see and how do we overcome these? Shell started with 3DP printing in 2011 and since then expanded the capability. In this presentation you will learn where we see value for this technology and how we overcome the challenges.

About Patrick de Winter
Patrick has been working for Shell since 1999 in various IT roles. The last 4 years he’s been part of Shell’s digital innovation team. He is responsible for spotting opportunities for emerging technologies into Shell and bring these ideas to life. He is the lead for 3D printing and also leads the community of Design Thinking practitioners across the company. Patrick has a background in mechanical engineering and business administration.

About Royal Dutch Shell plc
Shell is a global group of energy and petrochemical companies with an average of 92,000 employees in more than 70 countries. We use advanced technologies and take an innovative approach to help build a sustainable energy future. Continue reading “Why does 3D printing matter to Shell? – Presented by Patrick de Winter, Royal Dutch Shell”

Reverse Engineering – Presented by Maarten Oostdam, Oostdam Engineering

Maarten Oostdam

Reverse Engineering – Presented by Maarten Oostdam, Owner of Oostdam Engineering, at the 3D Printing Design & Engineering Conference, on April 17, 2018, at Brightlands Chemelot Campus, Geleen, The Netherlands.

Maarten Oostdam, Oostdam Engineering, will talk about Reverse Engineering of a Track (Comet tank 1944).

Interview

What drives you?

I want to be the best reverse engineer.

What are the three things you would take with you on a deserted island? Continue reading “Reverse Engineering – Presented by Maarten Oostdam, Oostdam Engineering”

Software Automation: The Future of Additive Manufacturing – Presented by Victoria Akinsowon, RP Platform

Victoria Akinsowon

Software Automation: The Future of Additive Manufacturing – Presented by Victoria Akinsowon, RP Platform, at the 3D Printing Design & Engineering Conference, on April 17, 2018, at Brightlands Chemelot Campus, Geleen, The Netherlands. Read the interview

As additive manufacturing is increasingly integrated into wider manufacturing systems, companies must find better ways to integrate what have traditionally been disparate and disconnected processes. As we shift further towards Industry 4.0, software automation will play a crucial role in connecting these systems, leading to more streamlined AM workflows, and ultimately transforming current business models and supply chains. Continue reading “Software Automation: The Future of Additive Manufacturing – Presented by Victoria Akinsowon, RP Platform”

Get it right, from the start – Presented by Orlando Sardaro, Design8

Get it right, from the start – Presented by Orlando Sardaro, Design8, at the 3D Printing Design & Engineering Conference, on April 17, 2018, at Brightlands Chemelot Campus, Geleen, The Netherlands. Read the interview

Do you start your design with a pencil on a piece of paper… ? Do you start your design in 2D or 3D on a computer screen… ? Are you the appropriate one to start the design process at all… ? Instead of analysing whether you’ve done a good job, let’s analyse first and make sure you get it right, from the start. Continue reading “Get it right, from the start – Presented by Orlando Sardaro, Design8”